A range of top quality seals for timber sliding sash windows.
|
 |
|
Double Flipper Parting Bead |
|
A pvc
parting bead with two independent flippers that provide an
effective seal for new or refurbishment work. Can be used as a direct
fit into a 9mm deep x 8mm wide groove or with the parting bead retaining channel
which allows the bead to be removed
without damage to timber. |
|
Supplied in 3m lengths in White or
Brown. |
| |
|
Groove size A: 8mm |
Groove size B: 9mm |
Height C: 17mm |
Gap size D: 10 -13mm |
|
|
 |
|
Opposing Flipper Parting Bead
|
|
A
pvc parting bead with opposing flippers that provide an effective seal
for new or refurbishment work. Can be used as a direct fit into a 9mm
deep x
8mm wide groove or with the parting bead retaining channel which allows the bead to be removed
without damage to timber. |
|
Supplied in 3m lengths in White only. |
| |
|
Groove size A: 8mm |
Groove size B: 9mm |
Height C: 16mm |
Gap size D: 10 - 13mm |
|
|
 |
|
Brushpile Parting Bead |
|
A pvc parting bead with
an
8.5mm brush fin pile that
provides an effective seal for new or refurbishment work. Can be
used as a direct fit into a 9mm deep x 8mm wide groove or with the parting bead retaining channel. |
|
Supplied in 3m lengths in White or Brown. |
| |
|
Groove size A: 8mm |
Groove size B: 9mm |
Height C: 16mm |
Gap size D: 10 - 13mm |
|
|
 |
|
Foamseal Parting Bead |
|
A pvc
parting bead supplied with a high performance PU foam bubble seal
(pre-inserted only), that will provides an effective seal for new or
refurbishment work. Can be used as a direct fit into a 9mm deep x 8mm
wide groove
or with the parting bead retaining channel
which allows the bead to be removed
without damage to timber. |
|
Supplied in 3m lengths in White only. |
| |
|
Groove size A: 8mm |
Groove size B: 9mm |
Height C: 16mm |
Gap size D: 10 - 12mm |
|
|
 |
|
Timber Parting Bead |
|
High quality
primed timber parting bead 25mm high, can be supplied with or without
5.5mm or 8.5mm brushpile, can also be supplied with our foam
bubble seal, fits into 8mm x 8mm groove, ideal where a
traditional look is required. |
|
Supplied in 3m lengths in White only. |
|
Choice of pile heights: 5.5mm
(suits gaps 1.5 – 3mm) or
8.5mm
(suits gaps 3.5 – 6mm) |
| |
|
|
|
NB - Pile/Foam is not
fixed so that it can be removed prior to painting bead |
|
|
 |
|
Parting Bead Retaining Channel
|
|
A 10mm x 10mm pvc channel for
new or for renovating damaged grooves, can be used with all the
pvc parting beads, can even be used with the timber parting
beads. |
|
Supplied in 3m lengths in White or
Brown. |
| |
|
Groove size A |
Groove size B |
|
10mm |
10mm |
|
|
 |
|
Self Adhesive Brush Pile Carrier |
|
Flat
based pvc carrier with self-adhesive backing tape available with or without
brush fin pile, can also be supplied with our foam bubble seal. |
|
Supplied in 2.2m lengths in White only. |
|
Choice of pile heights: 5.5mm (suits gaps 1.5 – 3mm) or
8.5mm (suits gaps 3.5 – 6mm) |
| |
|
Groove size A |
Groove size B |
|
8mm |
3.5mm |
We
can supply
ROUTER
CUTTERS to suit this profile
|
|
 |
|
Centre Leg Brush Pile Carrier |
|
Centre Leg pvc carrier for fitting into slot
available with or without brush fin pile, can also be supplied with our
foam bubble seal. |
|
Supplied in 2.2m lengths in White only. |
|
Choice of pile heights: 5.5mm
(suits gaps 1.5 – 3mm) or
8.5mm
(suits gaps 3.5 – 6mm) |
| |
|
Kerf size A |
Kerf size B |
Groove size C |
Groove size D |
|
2.7mm |
6mm |
3mm |
8mm |
We
can supply
ROUTER
CUTTERS to suit this profile
|
|
 |
|
Meeting Rail
Pile Carrier |
|
PVC seal with brushpile, used at meeting style on sash window.
|
|
Supplied in 3m lengths in
White or Brown. |
| |
|
Kerf size A |
Kerf size B |
Size C |
Size D |
Size E |
|
2mm |
4mm |
9mm |
12mm |
21mm |
|
|
|
|
Flexiseal Perimeter Seal |
|
Low friction seal used
at top, bottom and meeting rail, often used as an anti-rattle seal
between sash and pulley stile. |
|
Supplied in 2.2m lengths in
White only. |
| |
|
Kerf size A |
Kerf size B |
Height C |
Size D |
Size E |
|
2.7mm |
6mm |
2 - 6.5mm |
6.5mm |
9.5mm |
|
|
 |
|
Timber Staff Beads
|
|
High quality
primed timber staff bead, available in two sizes, can be
supplied with or without
5.5mm or 8.5mm brushpile, can also be supplied with our foam
bubble seal, ideal where a
traditional look is required. |
|
Supplied in 3m lengths in White only. |
|
Choice of pile heights: 5.5mm
(suits gaps 1.5 – 3mm) or
8.5mm
(suits gaps 3.5 – 6mm) |
| |
|
|
|
NB - Pile/Foam is not
fixed so that it can be removed prior to painting bead |
|
|
 |
|
Staf Seal |
|
PVC angled flipper seal can
be used on staff bead, bottom, top and meeting rails. |
|
Supplied in 2.4m lengths in
White or Brown. |
| |
|
Kerf size A |
Kerf size B |
Size C |
|
2.5mm |
5mm |
6mm |
|
|
 |
|
Brush Fin Pile |
|
Available in three pile heights, fits
into standard pvc or timber parting beads, timber staff beads
and self-adhesive & centre leg pile carriers. |
|
Supplied in White |
| |
|
Base A |
Height B |
Coil Size |
|
4.8mm |
5.5mm |
100m |
|
4.8mm |
8.5mm |
100m |
|
4.8mm |
11.5mm |
50m |
Tip: when fitting
brushpile into parting beads/staff beads/pile carriers apply a small
amount of super glue to hold in position.
|
|
 |
|
Foamseal
Bubble Seal
|
|
Foam seal
with a resilient HDPE outer skin, fits into standard pvc or timber
parting beads, timber staff beads and self-adhesive & centre leg pile
carriers. |
|
Supplied in White |
| |
|
Base A |
Height B |
Coil Size |
|
4.8mm |
6mm |
50m |
Tip: when fitting
foamseal into parting beads/staff beads/pile carriers apply a small
amount of super glue to hold in position.
|
