Home About Us Contact Us Latest News Product Range Search        Approvals
      Industrial/Commercial Brush Seals

Acoustic Seals
Conservatory Glazing
Draught & Weather
Finger Protection
Fire Protection
Joinery & Glazing

      

 

 

          

We can supply a range of seals suitable for Industrial and Commercial use, they provide an effective seal against Draught, Dust, Dirt, Noise, Smoke and Vermin (Mice, Rats, Cockroaches etc.)

Typical applications include sealing - Sliding, Up & Over, Side Hung, Revolving and Roller Shutter doors.

Benefits  

Will seal over uneven surfaces with little loss of performance

180º Straight Carrier

 Offer low resistance to moving surfaces
 Excellent wear and recovery properties

90º Angled Carrier

 Withstands temperatures from 100ºC down to -50ºC
 Suitable for use in water at all temperatures.

45º Angled Carrier

 Standard seals supplied with type 6 nylon brush

 Availability

Available with or without aluminium fixing carrier.

Lengths: 2m, 2.5m & 3m ~ cut lengths available to special order.

Trim lengths: 12mm to 250mm

Brush: Type 6 Black nylon filament ~ non-standard seals available.

We can also supply Brush Only Strips and custom kits for Folding/Concertina Doors.

 Installation

All sections can be cut to length using a fine tooth saw. It is most important that the galvanised steel channel which houses the nylon filament is then sealed to avoid filament loss, this can be achieved by pinching the end of the channel with pliers or wire cutters.

All seals should be fitted with the door/window in the closed position. The seals should be fitted so that the brush filaments are in firm contact with the mating surface. Care should be taken not to overflex the trim against the mating surface.

If the brush is slightly loose in the carrier, slide the brush out of the carrier and lightly bend brush, then tap/push back into carrier.

 Storage

Products should be stored in dry conditions taking care not to crush or damage the flexible seals.

 Health and Safety

The product does not present any known health hazards during or after installation.

Normal good industrial and personal hygiene practises should be observed.

Pyro-Seal is a registered trademark of Wessex Intumescent Supplies Ltd.
WIS Multiseal-It and WIS Draught Stoppers are trademarks of Wessex Intumescent Supplies Ltd.
All other trademarks are acknowledged.

All goods sold or offered are subject to our terms and conditions of sale - copies available on request

Copyright © 2007 Wessex Intumescent Supplies Ltd.